FAQ about the color of the foamed silicone sheet material on the surface

May 15, 2018

As a polymer elastomer material, rubber has been used in all walks of life in our daily life, such as sealing rings, tires, foot pads, basketballs, etc. Some of these rubber products are made of natural rubber, while others are It is artificially synthesized by modern scientific and technological means, and various products produced are playing more and more roles. At least no material has been found that can completely replace rubber.


The surface of the rubber products we usually come into contact with is whitish, which is to form a white frost-like substance on the surface. In terms of the industry, it means that the rubber surface spit frost. Usually, this situation will not affect the function of the product, but will affect the appearance quality. There are many reasons for the whitening of the rubber surface, among which the more common ones are:


1. There is a problem with the formulation of the rubber product itself. There are too many components, especially accelerators or vulcanizing agents, which cause the rubber to be pseudo-saturated vulcanization. At natural temperature, the molecules are still cross-linked. After the cross-linking is completed , the excess material will precipitate out of the surface, forming a rubber surface to spit frost.


2. There is a process problem in the production of rubber products, and the correct formula will also occur after the process is changed. For example, the vulcanization time is too short and the temperature setting is too high, resulting in false vulcanization.


3. Some substances are intentionally added when designing the formula. For example, in the formula of many rubber foot pads, we usually increase the amount of paraffin wax so that it can spit out the surface and form a protective wax substance in the later use. , which is the result of taking full advantage of the properties of rubber.


In fact, the surface whitish or spit out of rubber products is also a difficult technical problem to control in the rubber industry. Recently, there have been many anti-frost products that can be added to rubber formulations. It is believed that this problem will be better solved in the near future.