10mm Aerogel Blanket Pipe Insulation

Width 1500mm
Thickness 3/6/10mm
Maximum temperature: 600℃
Density: 180-200kg/m3

Description

Introduction:

10mm aerogel blanket pipe insulation is a composite material based on silica aerogel and glass fiber. Has excellent insulation, surface hydrophobicity and flame retardancy. Its thermal conductivity at room temperature is about 0.016W (m.k), which is lower than the thermal conductivity of still air. The hydrophobic rate can reach 99% at room temperature. It also has excellent flame retardant properties, and the fire rate reaches the national standard A1 level. It has a wide operating temperature range. Generally, it can work normally at -200℃-650℃ according to different requirements. In addition, it is easy to cut and install on the construction site.

Specifications:

Width 1500mm Thickness 3/6/10mm

Maximum temperature: 600℃ Density: 180-200kg/m3

Thermal conductivity:

25℃,0.020W/m•K 200℃,0.028W/m•K

300℃,0.035W/m•K 400℃,0.044W/m•K

500℃,0.069W/m•K

Features:

(1) Low thermal conductivity

10mm aerogel blanket pipe insulation is 5 times that of traditional materials, at room temperature: about 0.02w/(m*k), even lower than the thermal conductivity of air.

(2) High fire rating

Non-combustible Class A, no smoke, no dripping, no harmful gas

(3) Excellent waterproof performance

Water repellency rate>99%, mass moisture absorption rate<0.5%.

(4) Long service life

10mm aerogel blanket pipe insulation has a unique three-dimensional network structure. It will not melt, sinter or pulverize after long-term use at 650℃. Silica aerogel is an inorganic material that does not age under long-term ultraviolet radiation and has good properties. Weather resistance.

(5) Green and environmental protection

It does not contain chlorides and halogens and can be used in landfills. Has passed the EU RoHS test.